Agricultural equipment powder coating is a factory-grade finishing process that bonds a cured, protective layer to fabricated steel, so implements, trailers and attachments resist rust, abrasion and chipping through every season. Koojo Custom Powder Coating works from 10874 Steeles Ave E in Milton, Ontario, and has finished more than 10,000 items since 2012. Our farm equipment powder coating service is built for equipment dealers, builders and Ontario agricultural suppliers who need dependable finishes, predictable scheduling and parts that return ready to bolt on.
Standard orders carry a 48-hour turnaround, and our team is available Monday to Friday, 7 AM to 5 PM. Send photos, drawings or a sample part, and we will confirm the prep method, powder and timing before any work begins. If you already know which hitch, frame or attachment needs finishing, request a quote and we will reply with a clear plan and a seasonal turnaround you can schedule around. That is what a good finish should deliver: protection that holds up in the field and a supplier that keeps your machines working.
Since 2012 | 10,000+ Items | 48 Hr Turnaround | 5.0 ★ Google Rating
Coating Challenges in Agricultural & Heavy Equipment
Agricultural machinery powder coating must survive mud and moisture, chemicals and constant impact without flaking or fading. The main challenges are fertilizer corrosion, stone and soil abrasion, chipping at hitch points, and short seasonal windows that leave little room for rework or equipment downtime.
Heavy equipment powder coating is demanding because welded steel frames, booms and buckets combine thick plate with thinner brackets, and those areas heat at different rates in the oven. Grease, mill scale, old paint and field rust block adhesion unless they are removed first. Hitch points and buckets need an abrasion-resistant finish, while hollow tubing can trap moisture and pins, bushings and hydraulic fittings need precise masking. Good agricultural equipment powder coating starts when preparation, powder choice and oven loading are planned together rather than treated as separate steps.
Weld seams, edges and hitch points are the first places where coatings fail, so they get the most attention. Timing is the other pressure. Planting and harvest do not wait, so a finisher has to hold a dependable lead time and speak up early when a part needs extra work. Machines parked outdoors also face sun, mud and winter roads, so powder coating for agricultural equipment depends on a powder that gives road salt protection and long-lasting protection.
Parts and Metals We Coat for Farm and Heavy Machinery
We coat mild steel, aluminum and welded assemblies used in agricultural and heavy equipment, including implement frames, trailers, hitches, loader buckets and attachments. Parts range from small batches of brackets up to large structures within our 6,000 lb capacity.
Mild steel is the most common metal in agricultural machinery powder coating, and it responds well to blasting and phosphate pre-treatment before coating. Aluminum covers and panels are cleaned and prepared differently so the powder bonds without trapping gases. Our agricultural equipment powder coating program covers the following parts:
- Implement powder coating for field tools, cultivator frames and sprayer boom coating
- Trailer powder coating and hitch and drawbar coating for flatbeds, wagons and towed units
- Tractor attachment powder coating for brackets, mounts and bolt-on attachments
- Buckets and quick-attach tools, including loader bucket powder coating, skid steer attachments and excavator attachments
- Grain handling equipment and livestock handling equipment such as augers, feeders and handling frames
Long booms, wide implements and heavy trailers are racked so powder reaches every weld and corner, and parts are supported during curing to prevent distortion. Heavy equipment powder coating on thin sheet covers gets extra care to avoid warping.
Oversized parts are handled in our large oven, and the capabilities page lists current size and weight limits so you can check a part before sending it. For farm equipment powder coating, we can finish small brackets and larger frames in the same order, which keeps an assembly's colour consistent across every piece.
Finishes and Specifications for Field-Ready Equipment
Most agricultural machinery powder coating uses a thermoset polyester, epoxy or hybrid powder, applied by electrostatic spray and cured in the oven at roughly 180–200 °C. We match customer colour samples and offer matte, gloss, textured and metallic finishes.
Choosing the right finish is part of agricultural equipment powder coating done well. Texture is a practical choice because it hides weld marks and minor scratches, while gloss wipes clean more easily after fertilizer or field work. Dealer and brand colours can be matched and recorded, so colour-matched replacement parts arrive looking like the original.
A UV-resistant powder coating keeps colour from fading in strong sun, epoxy suits sheltered parts that need hardness, and hybrids balance the two. An outdoor-grade powder suits exposed frames, and the goal is a chemical-resistant finish with real harsh weather durability, so powder coating for agricultural equipment rests on how the part will be used.
We check quality rather than assume it in heavy equipment powder coating, where a thin edge is the first place rust shows. Thickness is measured with a calibrated gauge to ASTM D7091, adhesion can be tested to ASTM D3359, and ASTM B117 corrosion testing is available when a project calls for it. Test reports are provided on request, and our quality steps are documented with the Absolute Bureau of Certification.
In farm equipment powder coating, threaded holes and sliding surfaces are masked with plugs and tape so the finish never interferes with assembly. We plan pin and bushing masking and hydraulic fitting masking on the work order before coating starts, so tell us which surfaces must stay bare.
How We Work With Equipment Owners and Dealers
Our powder coating for agricultural equipment process runs from quote to delivery in a fixed sequence: inspection, preparation, masking, coating, curing, quality check and packaging. Standard orders leave in 48 hours, and our shop is open Monday to Friday, 7 AM to 5 PM.
- 1. Send photos or drawings with the quantity, metal and colour you want.
- 2. We inspect the parts and confirm the prep method, powder and delivery timing in writing.
- 3. Parts are degreased, blasted if needed, pre-treated and masked.
- 4. Powder is applied by electrostatic spray and cured at roughly 180–200 °C.
- 5. Each batch is inspected, then packed to prevent scratches in transit.
- 6. You pick up at our Milton shop, or we arrange delivery.
For repeat farm equipment powder coating, we keep colour codes and prep notes on file, so later jobs move faster and look the same. Many owners book off-season refurbishment in winter, and equipment dealers can send OEM replacement parts in batches that we log by colour code. Agricultural equipment powder coating is planned around your calendar, and we update you if timing changes. If a part arrives with heavy grease, rust or old coating, we tell you before coating, not after.
Services Owners Combine With Coating
Farm equipment powder coating is usually paired with preparation and, for older machines, with stripping and refinishing. These are the services most often combined on one work order, so each job stays simple.
Our industrial powder coating service covers heavy structures and attachments. Surface preparation and pretreatment handles degreasing, phosphate treatment and masking, which determines how well the powder bonds. Sandblasting removes rust, mill scale and old paint so a rust-resistant powder coating bonds to clean steel, and mobile blasting is available for machines that cannot be moved easily. For worn machines, stripping and recoating brings a tired frame back to a clean, protected finish. Together these services make agricultural equipment powder coating a one-supplier job, from bare steel to bolt-on ready parts. Teams that finish trailers and attachments in volume often start with blasting, then move to a repeating schedule once the first batch is approved, which makes heavy equipment powder coating predictable from one order to the next.
Proof From Our Project Work
Our project work shows how we document, prepare and finish large welded steel frames. Each case study lists the client industry, part, metal, size, powder, colour code and turnaround, so you can compare it with your own requirements.
Our conveyor frame case study for an automotive plant shows how we prepare, rack and finish a large welded frame, the same discipline we apply to implement frames and trailers. You can also browse the project gallery for other fabricated steel parts. Each job reflects how we approach agricultural equipment powder coating: document the part, agree the preparation, record the colour code and deliver on the date we promised. Reviewing these examples helps owners judge whether our heavy equipment powder coating suits their needs before they send parts.
Ready to protect your implements, trailers or attachments with a tough, field-ready finish? Request a quote today. Call (905) 876-7060 or email us, and our team will reply during shop hours, Monday to Friday, 7 AM to 5 PM.
Frequently asked questions
Is powder coating suitable for tractor attachments and implements?
Yes. Agricultural machinery powder coating gives attachments and implements a hard, uniform finish that resists soil, chemicals and cleaning. It forms a continuous barrier that resists moisture better than conventional wet paint, and our pretreatment promotes good adhesion to welded steel. Tell us about the working conditions when you request a quote so we can recommend the right powder.
What is your turnaround time on farm equipment?
Standard orders take 48 hours once parts are received and the specification is approved. Large implements or orders requiring heavy sandblasting can take longer, and we confirm the schedule before work starts. If you have a planting or harvest deadline, tell us early so we can reserve oven time.
How do I get a quote for powder coating equipment?
Use our quote form or call (905) 876-7060 with part dimensions, metal type, quantity and current condition. Photos help us identify weld seams, old paint or heavy rust that may need extra preparation. We will reply with a detailed price and lead time during shop hours, Monday to Friday, 7 AM to 5 PM.
Can you coat used or rusted equipment?
Yes. We regularly refinish used implements, trailers and attachments. Old paint, grease and rust are removed through degreasing and sandblasting to achieve clean bare steel before pretreatment and powder application. We inspect every used part and will notify you if repairs or welding are needed before coating.
Do you offer pickup and delivery for heavy parts?
Yes. We can coordinate pickup and delivery across Milton, Halton, Peel, Hamilton and the Waterloo Region for large or heavy equipment. Our shop has forklift capacity up to 6,000 lb for safe offloading. Mention delivery requirements when you submit your quote request.