10874 Steeles Ave E, Milton, ONMon to Fri, 7 AM to 5 PM(905) 876-7060

Powder Coating Services

All of our services in one place. Choose a service to see what it covers, what we coat and how to prepare your parts.

Also asked about

Powder coating services at Koojo Custom Powder Coating cover every step from bare metal to finished part: blasting, pretreatment, masking, spraying, curing and inspection, all under one roof. Since 2012 our full-service powder coating shop has finished more than 10,000 items.

Industrial clients, trade customers and homeowners all use the same in-house prep and coating, whether the job is one bracket or a production run. Pick a service below or read on for how the work is done, what it costs to plan and how long it takes. Most standard orders leave within 48 hours, and the shop is open weekdays from 7 AM to 5 PM. Every job starts with a conversation about the part, its use and the finish you want, so the plan fits before any price is given.

23 ft Oven (9 ft W x 9 ft H) · Up to 6,000 lb · 48 Hr Turnaround · In-House & Mobile Sandblasting · Since 2012 · 10,000+ Items · 5.0 ★ Google Rating

What Are Our Powder Coating Services?

They are ten connected metal finishing services that take a part from rust, scale or old paint to a cured, tested finish. Some jobs need one step, others need several, and we combine them into a single order.

Powder coating itself is a dry powder sprayed by electrostatic spray and hardened by oven curing, which gives protective coatings that resist chips, fading and corrosion better than many liquid paints. Around that core sit the supporting coating services: surface preparation, blasting, colour work, stripping and recoating, plus specialist work for vehicles, wheels, buildings, volume orders and one-off pieces. That one-stop finishing approach keeps quality consistent and saves you managing several suppliers, each with its own schedule, standards and paperwork.

What We Can Coat: Size, Weight and Volume

Parts as long as 23 ft and as heavy as 6,000 lb fit our line, in quantities from a single piece to recurring batches. Metals include carbon steel and aluminum, structural steel, cast iron and galvanized steel.

Capability

Detail

Oven length

23 ft

Oven width x height

9 ft x 9 ft

Maximum part weight

6,000 lb

Order size

One-off and production work

Blasting

In-house, plus mobile sandblasting on site

Cure

180–200 °C, per powder data sheet

Our service range is planned around size from the first call, so long frames and heavy bases get their own cure cycle. We handle one-off and production work on the same line, and batches of small parts can share an oven load with a larger piece in the same colour. For full limits and a fit check, see large part powder coating, which explains how big work is loaded and racked under our powder coating services.

How Our Powder Coating Services Work

Every order follows the same eight steps, from checking your drawing to packing the finished parts. The steps are fixed so results stay consistent, whether we handle one service for you or all of them.

  • Inspection & Spec Review: We check each part against your drawing, confirm the finish and mark every surface that must stay bare. We also agree which of our powder coating services the part needs, so nothing is added later without your approval.
  • Abrasive & Mobile Sandblasting: Blasting removes rust, mill scale and old coatings, in the shop or on site, leaving a clean profile the powder can grip.
  • Cleaning & Phosphate Pretreatment: Degreasing and pretreatment prepare the metal so the powder bonds firmly, then parts are rinsed and fully dried. Pretreatment also slows corrosion under the coating if the finish is ever damaged.
  • Masking & Plugging: Masking and plugging protect threads, mounting faces and contact points. Plugs and high-temperature tape come off after curing, leaving clean edges.
  • Electrostatic Powder Application: Charged powder wraps around edges and into corners for even coverage, the core of our service range. Film build is kept even so colour and gloss match across every part in a batch.
  • Oven Curing: Parts cure at 180–200 °C until the metal itself reaches temperature, so thick sections cure fully. Curing time follows the powder maker's data sheet, not guesswork.
  • Quality Inspection & DFT Check: Quality inspection covers film thickness, adhesion, colour and coverage before release. Results are recorded, so test reports can go out with any of our coating services on request.
  • Packaging & Shipping: Packaging and shipping protect finished faces, and the job ends with pickup or delivery. Finished faces are wrapped so they arrive exactly as they left inspection, the final step of every service.

Which Service Do You Need?

Match your part to a service card below. Each card links to a page with that service's full process, options and FAQs; if your job needs several, we combine them into one quote.

Our powder coating services are grouped by what the part needs rather than by department, because most jobs use two or three of them together. Every service page explains when it applies and what it adds.

Service card

Best for

Page

industrial powder coating

Machinery, frames and heavy equipment

Pillar

powder coating surface preparation

Degreasing, pretreatment, masking

Service

sandblasting services

Rust, scale and old coatings; on-site work

Service

custom powder coating colours

RAL shades, textures, metallics

Service

powder coat stripping and recoating

Worn or failed finishes

Service

automotive powder coating

Frames, chassis and car parts

Service

rim powder coating

Wheels and rims

Service

architectural powder coating

Railings, window frames, fences

Service

commercial powder coating

Recurring and high-volume orders

Service

specialty powder coating

Prototypes, art pieces, one-offs

Service

Five more service cards sit on this page only, because each one is handled within a service above. Use them to find the right page fast.

Hub-only card

Handled by

Fence & Railing

Architectural service

Machinery & Equipment

Industrial service

Outdoor Furniture

Custom colours, plus the outdoor furniture article

Masking & Plugging

Surface preparation

Packaging & Shipping

Included with every order

Fence and railing work, machinery and equipment, and outdoor furniture refinishing are common requests, so these service categories help visitors who search by part rather than by process.

Performance Testing and Quality Control

Every finished order is checked before release, and the results are recorded against the job. The table shows each test, the method used and how often it runs, so you know what stands behind every service.

Test

Method

Frequency

Film thickness (DFT)

ASTM D7091

Every order

Adhesion

ASTM D3359

Every batch / on request

Salt-fog exposure

ASTM B117

On request (outside certified testing lab)

Visual, colour, gloss

Approved colour code

Every part

An outside body, the Absolute Bureau of Certification, certifies our quality system, and we can send test reports with any order. See powder coating quality assurance for the full checks behind our powder coating services. Readings are taken where coatings fail first, on edges, welds and inside corners, not only on flat faces, and any part that misses a check is corrected before it leaves.

If you need readings for a supplier audit or a warranty file, ask when you order. We match the paperwork to your quality system, from a single summary to readings for each part, and keep the records so repeat orders for the same powder coating services can be checked against the first.

Industries and Parts We Coat

Seven industries account for most of our work, and each has its own page showing the parts, finishes and schedules that sector needs. Pick yours to see how the work fits your sector. Fabricators and contractors send the most parts, followed by manufacturers with recurring batches and public buyers with tender work.

Industry card

Typical parts

powder coating for metal fabricators

Weldments and fabrications

powder coating for manufacturers

Frames, guards, enclosures

powder coating for machine shops

Machined parts with tight tolerances

powder coating for contractors

Railings, steel, site equipment

powder coating for food processing equipment

Line frames for washdown areas

agricultural equipment powder coating

Field and heavy equipment

powder coating for municipalities

Bollards, gates, public metalwork

Each industry page lists the services that sector uses most, a matching project and the questions buyers in that field usually ask, so you can plan with the right detail before you call. If your sector is not listed, call us; coating services are not limited to these seven. Our service range adapts to new part types every month, from prototypes to replacement parts for older equipment.

Powder Coating Services vs Wet Paint vs Galvanizing

Powder gives durable finishes in almost any colour, wet paint suits quick touch-ups and heat-sensitive parts, and galvanizing gives zinc protection with limited looks. The table compares all three at a glance.

Property

Powder coating

Wet paint

Galvanizing

Durability

Hard, chip-resistant film

Softer, more prone to chips

Very high corrosion resistance

Finish options

Wide colour and texture range

Wide colour range

Metallic grey only

Waste

Little; overspray can be reclaimed

Solvents and overspray

Zinc bath process

For a deeper look, read powder coating vs wet paint and powder coating vs galvanizing. Galvanized steel can also be powder coated when you want both zinc protection and colour. Many customers combine methods, with zinc underneath for protection and powder on top for colour. Our coating services team can advise which route suits your part, its exposure and its budget before you commit.

Recent Projects Across Our Service Range

Three recent case studies show different services at work on very different parts, from industrial prep to outdoor and restoration finishes. Each one includes specs, photos and test readings you can check.

Project card

Services used

Conveyor Frame for an Automotive Plant

Industrial, sandblasting, surface preparation

Safety Bollards

Architectural, sandblasting, custom colours

Church Gates

Stripping and recoating, architectural, colours

Browse every finished job on our powder coating projects page, where you can filter by industrial, automotive, architectural and specialty work.

What Affects Cost and Lead Time

Price and timing for powder coating services depend on part size, the prep needed, quantity, colour and masking. Standard orders leave two working days after drop-off, while oversized or complex jobs get their own written schedule with the quote.

Heavy rust or old coatings add blasting or stripping time, while batches of matching parts spread setup costs. Special colours and detailed masking add labour. We do not list prices here, because two similar parts can need different work. For typical ranges, read our guide to powder coating cost, then ask for a written price on your own parts. Every service is priced job by job. If your deadline is fixed, say so with the request, and we will confirm in writing whether the date can be met before you book.

How to Get a Quote for Our Work

Send photos, sizes, quantity, metal and the finish you want for anything in our service range, and we come back with a written price, prep plan and timeline. You can also bring parts to our Milton shop, just off Hwy 401, Monday to Friday, 7 AM to 5 PM. Use the online powder coating quote form, or phone (905) 876-7060.

Ready to Start Your Project?

Tell us about your parts and we will recommend the right mix from our service range, with prep, finish options and timing in one written quote. Phone (905) 876-7060, or upload photos and measurements on the quote page. We answer weekdays between 7 AM and 5 PM.

Frequently asked questions

question

answer

question

answer

question

answer

question

answer

question

answer

Ready to get your parts coated?

Tell us what you have and when you need it back.