10874 Steeles Ave E, Milton, ONMon to Fri, 7 AM to 5 PM(905) 876-7060

Powder Coating Cambridge

Powder coating for Cambridge fabricators and Waterloo Region manufacturers.

Powder coating Cambridge businesses rely on starts with a shop that is close, certified and fast. Koojo Custom Powder Coating has finished metal parts at its Milton shop since 2012, and more than 10,000 items have gone through our oven. When you need powder coating Cambridge fabricators, manufacturers and contractors can count on, we offer a 48-hour turnaround, pickup and delivery, and a team that answers the phone Monday to Friday, 7 AM to 5 PM.

Our shop at 10874 Steeles Ave E, Milton, is roughly 30 minutes from Cambridge by Highway 401. That short drive keeps transit time low and gives your parts a tough, even finish. Whether you have one prototype part or a full production run, our powder coating Cambridge customers get the same careful preparation, controlled curing and documented quality checks.

Koojo is a Milton-based powder coating shop, and our process combines surface preparation, electrostatic application and oven curing under one roof. That means fewer hand-offs, fewer delays and a finish you can specify with confidence. If you are searching for powder coating Cambridge Ontario buyers can reach by phone and trust with repeat orders, you are in the right place.

Drive time from Cambridge: about 30 min · Pickup & Delivery · 48 Hr Turnaround · 5.0 ★ Google Rating

What We Coat for Cambridge Businesses

We coat steel, aluminum and other metal parts for Cambridge businesses, from small brackets to heavy frames up to 6,000 lb. Every job is cleaned, prepared, coated and cured in our oven, so the finish bonds well and lasts through daily use.

Our powder coating Cambridge work covers conveyor frames, machine guards, robotic bases, weldments, railings, gates, trailer parts and equipment housings. We apply powder with electrostatic powder coating guns, then cure it in our curing oven until it forms a hard, even layer. The result is a corrosion-resistant finish and a chip-resistant finish that hold up far better than many liquid paints.

Because we are a custom shop, you choose the colour, gloss level and texture. We offer RAL colour matching, plus matte, gloss and textured finishes for indoor and outdoor parts. If you are comparing options for metal powder coating Cambridge buyers often ask one question first: will this finish survive my environment? We help you answer it before any powder goes on, whether the job is steel powder coating, aluminum powder coating or a mixed assembly.

For repeat work, custom powder coating Cambridge customers can send photos, drawings and dimensions first. We confirm what is possible, flag concerns such as welds or hollow sections, and explain what to expect before your parts leave your dock. Clear communication up front reduces rework, protects your schedule and supports the outdoor durability your parts need.

Getting Your Parts from Cambridge to Our Milton Shop

You can drop parts at our Milton shop, about 30 minutes from Cambridge on Highway 401, or ask about pickup and delivery. Our turnaround is 48 hours, and the shop is open Monday to Friday, 7 AM to 5 PM.

The route is direct. Take Highway 401 east to Milton and follow the signs to Steeles Avenue East. Plan on roughly 30 minutes without traffic, and allow extra time during rush hour. Drop-off for powder coating Cambridge orders is simple: bring your parts during business hours, and we will confirm the job details with you on arrival.

Larger orders may suit powder coating Cambridge pickup and delivery, so your team can stay focused on production. Send us your part list, quantity and target date, and we will talk through a schedule. Packaging and shipping are part of our process, so finished parts come back protected and ready to install.

Our 48-hour turnaround applies to powder coating Cambridge projects just as it does for nearby cities. If your project is urgent, call (905) 876-7060 between 7 AM and 5 PM on a weekday, and we will explain what timing is realistic. Koojo is also a powder coating company GTA buyers can work with, so every powder coating shop Cambridge customers choose benefits from the same standards across our wider service area.

Cambridge Industries We Coat For

Cambridge has a strong manufacturing base, including automotive suppliers, machine shops, fabricators and food equipment builders, and these shops need finishes that survive heavy use. We coat parts for each of these sectors with repeatable quality.

Fabricators and welding shops in Cambridge send us weldments, frames and structural parts that need a tough, uniform coat. Machine shops value careful masking of threaded holes and precision surfaces. Cambridge manufacturers and automation builders rely on us for conveyor frames, robotic bases and machine guards that must look the same from batch to batch.

For these buyers, powder coating Cambridge projects work best with one finishing partner who delivers on time and keeps batch-to-batch consistency. Production runs are easier to plan when colour, thickness and curing are controlled, and prototype parts can follow the same process before you commit to volume. That makes powder coating Cambridge a practical choice for shops that value uptime.

Automotive suppliers send brackets, frames and small parts, while food equipment makers ask about washdown-resistant finishes. For those jobs we discuss suitable powders and your compliance needs before coating starts. To see how we support each sector, read our pages on powder coating for machine shops and powder coating for food processing equipment. Buyers searching for powder coating Cambridge Ontario often want proof of quality too, so we back our work with documented quality checks and certification through the Absolute Bureau of Certification.

Services Cambridge Customers Order

Three services suit most Cambridge projects: industrial powder coating, sandblasting and custom colours. Each is handled at our Milton shop, with preparation first, so the powder bonds properly and the finish lasts.

Start with industrial powder coating for frames, equipment and structural steel. If parts arrive with rust or old paint, our sandblasting services clean the surface before coating, and we also offer mobile sandblasting for work that cannot travel. Then choose from custom powder coating colours to match your brand or specification. Before coating, we handle degreasing and masking so threaded holes and mating surfaces stay protected.

Every powder coating Cambridge project starts with a review of your drawings. We look at the metal, the geometry and the service environment, then recommend a preparation method, powder type and cure. A bracket that lives indoors needs a different approach from a gate or frame that sees rain, sun and winter road salt, and we explain our reasoning in plain language so you can approve the plan with confidence.

Whichever combination you need, you can review our full range on our powder coating services page. A powder coating Cambridge order is handled in one place: preparation, coating, curing, inspection and packaging.

A Project Example for Cambridge Customers

Our conveyor frame project for an automotive plant shows how we coat the frames and structures that Cambridge manufacturers use every day. We prepare the steel, apply a durable powder finish and cure it for a hard, even result.

Every project begins with the same checklist: the metal, part dimensions and weight, quantity, colour code and deadline. With those details we can plan masking, choose the right powder and confirm the cure. When a powder coating Cambridge job turns into repeat orders, we aim to keep colour and process consistent so later batches match the first.

Read the conveyor frame case study for the part, powder and turnaround details. Projects like this reflect the powder coating Cambridge work we welcome: repeatable parts, clear specifications and firm deadlines. Share your drawings, and we will tell you how we would prepare, coat and cure your part.

Directions and Map from Cambridge

From Cambridge, take Highway 401 east to Milton and follow the signs to 10874 Steeles Ave E, Milton, ON L9T 2X8. The drive is roughly 30 minutes without traffic, and our doors are open Monday to Friday, 7 AM to 5 PM.

Call (905) 876-7060 or email sales@koojopowdercoating.com before you visit, so we can have your powder coating Cambridge order details ready. Use the map for turn-by-turn directions, and see our contact page for drop-off and pickup information. For a quick overview of every city we serve, visit our powder coating service areas hub, which links to each powder coating Cambridge neighbour.

Request Your Powder Coating Cambridge Quote

Ready for powder coating Cambridge customers trust? Send your part details through our quote form or call (905) 876-7060, Monday to Friday, 7 AM to 5 PM. Tell us the part, size, quantity and finish, and we will confirm pricing and timing for your powder coating Cambridge project. Our team is ready to review photos, drawings and specifications, and we will tell you what we need to move your parts through the shop quickly.

Visit or contact the shop

Address

10874 Steeles Ave E
Milton, ON L9T 2X8

Get directions

Office hours

Monday to Friday, 7 AM to 5 PM

Frequently asked questions

question

answer

question

answer

question

answer

question

answer

question

answer

question

answer

Ready to get your parts coated?

Tell us what you have and when you need it back.